MCP Radar
MCP 서버

reference

eu.cuttingtoolsai/reference
과학 및 엔지니어링 공개 · 연결 가능 MCP 2026-07-28

이 MCP로 할 수 있는 일

Provides cutting-tool grade and material cross-references plus starting speeds and feeds for carbide turning.

기능

도구

3 도구
grade_cross_reference
Cross-reference a carbide insert grade across manufacturers. Given any maker's grade (e.g. GC4325, KC5010, IC807), returns its ISO 513 application position(s) and the grades other manufacturers publish at the same position, each row carrying its verification status (multi-source consensus / confirmed by 2+ manufacturer charts / single-source chart). Comparable-at-ISO-position is a trial starting point, not an interchangeability guarantee.
입력 스키마 
{'type': 'object', 'required': ['grade'], 'properties': {'brand': {'type': 'string', 'description': "Optional: the grade's manufacturer, to disambiguate codes used by several makers"}, 'grade': {'type': 'string', 'description': 'The grade code to cross-reference, e.g. "GC4325" or "KC5010"'}}}
material_cross_reference
Cross-reference a workpiece material designation across standards (EN, Werkstoffnummer, AISI/ASTM/UNS, JIS) from a curated 77-material set, e.g. "1.4404" -> AISI 316L / X2CrNiMo17-12-2 / SUS316L. Each match includes the ISO 513 machining group, a machining note, and whether the pairing is a same-composition equivalent or a nearest commonly-cited counterpart. Always verify against the material certificate.
입력 스키마 
{'type': 'object', 'required': ['designation'], 'properties': {'designation': {'type': 'string', 'description': 'Any designation: EN name (42CrMo4), Werkstoffnummer (1.7225), AISI/UNS (4140, G41400), JIS (SCM440), or a common name (316L, Inconel 718)'}}}
speeds_feeds_starting_values
Starting cutting-speed and feed ranges for coated-carbide TURNING by ISO 513 material group (P steel, M stainless, K cast iron, N aluminium, S_TI titanium, S_NI nickel superalloy, H hardened steel). These are deliberately wide practice ranges, not from any one catalog; the maker's data for the exact grade always wins.
입력 스키마 
{'type': 'object', 'required': ['iso_group'], 'properties': {'iso_group': {'enum': ['P', 'M', 'K', 'N', 'S_TI', 'S_NI', 'H'], 'type': 'string', 'description': 'ISO 513 group. Use S_TI for titanium, S_NI for nickel superalloys.'}}}
기록

최근 도구 변경

변경됨
grade_cross_reference
2026년 9월 25일 2:50 AM
추가됨
speeds_feeds_starting_values
2026년 9월 17일 12:39 PM
추가됨
material_cross_reference
2026년 9월 17일 12:39 PM
추가됨
grade_cross_reference
2026년 9월 17일 12:39 PM
탐색

유사한 MCP 서버

Clink Forge

com.clinkforge/clink-forge

Provides pay-per-call access to attested government datasets, primarily CDC and HHS health data plus EPA air-quality observations.

workbench

com.seqbench/workbench

Provides computational molecular biology tools for DNA, RNA, and protein analysis, cloning, PCR, CRISPR, oligonucleotide design, …

gisgp

io.github.uponex/gisgp

Provides GIS geocoding, routing, spatial transformations, ArcGIS layer inspection and export, and location due diligence for haza…

calc.engineer

engineer.calc/calc

Provides deterministic engineering calculators for RF and LoRa systems, electronics, batteries, solar and power systems, cooling,…

Good Earth

io.github.lonniev/goodearth-mcp

Provides plot-specific climate and growing-season analysis for gardens and farms, including frost, heat accumulation, crop suitab…

osint

build.exascale/osint

Provides source-cited US data and schemas for power systems, AI infrastructure, semiconductor production and trade, robotics, and…

EngScript Engineering MCP

com.engscript/mcp

Performs engineering calculations for oil and gas applications, including thermodynamics, fluid systems, equipment sizing, balanc…

civilquants

com.civilquants/civilquants

Calculates parametric civil-engineering quantities and Bills of Quantities for drainage, earthworks, retaining walls, pavements, …