Servidor MCP
walletlink.social
social.walletlink/wallet-identity
Qué hace este MCP
Resolves Ethereum wallet addresses to X, Farcaster, ENS, Lens, and GitHub identities, and performs reverse wallet lookups by social account.
Capacidades
Herramientas
8
herramientas
walletlink_account_balance
Match credit balance
How many match credits the configured key has left, and how much of the request allowance it has used.
COST: free on both meters. Call it before a reverse lookup, which can spend up to 100 credits in one go.
matches_available is the meter that stops a metered call: at zero, the resolve and reverse tools refuse, while this tool and the coverage tool keep answering, so a drained key can always read its own meter. rate_limit_units_used is a separate count of requests and is not a credit figure.
unmetered is true on an account that is never debited. Its matches_available is null because it has no balance to report, not because the balance is zero.
Solo lectura
Idempotente
Esquema de entrada
{'type': 'object', 'properties': {}}
walletlink_estimate_list
Estimate a list before spending on it
A dry run over a list of addresses: how many are in the index, how many were checked and found bare, how many have never been seen, and the band a resolve would bill inside. Counts only, no identities. Use it to decide whether a list is worth resolving, and which tool to spend on.
COST: free on the match meter, always, even at zero balance. It weighs the rate window exactly like resolving the same list (one request-unit per address), so it previews a batch at the batchâs own pace. Minimum 10 distinct addresses, because the counts are aggregates by design; the ceiling is your planâs batch ceiling.
Reading the band: low is exact for resolving this list now (the addresses already holding an X handle or a Farcaster account). high adds never-checked addresses at the measured overall rate; a background job resolves those against live sources, a plain resolve does not. Match rates differ several-fold by chain; the coverage tool and /v1/stats carry the measured per-chain table.
Solo lectura
Idempotente
Esquema de entrada
{'type': 'object', '$schema': 'https://json-schema.org/draft/2020-12/schema', 'required': ['addresses'], 'properties': {'addresses': {'type': 'array', 'items': {'type': 'string', 'pattern': '^0x[a-fA-F0-9]{40}$'}, 'maxItems': 1000, 'minItems': 10, 'description': 'Ethereum addresses, each 0x followed by 40 hex characters. Case does not matter.'}}}
walletlink_index_coverage
Index coverage
How much of the index carries each identity type. Use it to judge whether a lookup is worth making before making it.
COST: free on both meters. It resolves no wallet and consumes no rate limit. A key whose balance is zero can still read the free endpoints; the balance and coverage reads keep answering at zero, and only a call that could bill refuses with NO_CREDITS.
addresses_with_an_identity over addresses_checked is the coverage rate. The second number is larger because it counts addresses we have looked at and found bare. The counts are refreshed daily rather than counted live; as_of says when they were taken, and asking twice in a day returns the same numbers.
Solo lectura
Idempotente
Esquema de entrada
{'type': 'object', 'properties': {}}
walletlink_job_status
Check a background job
Progress and results for a job submitted with walletlink_submit_job. While the job runs it reports processed counts; on completion it reports the resolved records and what was billed.
COST: free on both meters, so a drained key can still collect results it already paid for. A field that is absent was not measured. Absent is not false: a missing reachability means the handle was not checked, never that nobody is behind it.
Only jobs submitted by this account are visible; any other id answers not found.
Solo lectura
Idempotente
Esquema de entrada
{'type': 'object', '$schema': 'https://json-schema.org/draft/2020-12/schema', 'required': ['job_id'], 'properties': {'job_id': {'type': 'string', 'pattern': '^[0-9a-f]{8}-[0-9a-f]{4}-[0-9a-f]{4}-[0-9a-f]{4}-[0-9a-f]{12}$', 'description': 'The job id returned by walletlink_submit_job.'}, 'offset': {'type': 'integer', 'maximum': 9007199254740991, 'minimum': 0, 'description': 'Result row to start from, for a completed job. Pass the next_offset from a previous call to continue. Omit for the first page.'}}}
walletlink_resolve_wallets
Resolve wallets to social identities
Resolve one or more Ethereum addresses to the social identities attached to them: X handle, Farcaster account, ENS name, Lens profile, GitHub account.
COST: one match credit per address that resolves to an X handle or a Farcaster account. An address that resolves to nothing is free, and so is one carrying only an ENS name, a Lens profile or a GitHub account. Up to 50 addresses per call on the default plan; a live Scale pack raises the ceiling to 200 and Index to 1000, and the API refuses over YOUR ceiling with BATCH_SIZE_EXCEEDED naming it. A batch call spends one request-unit per address of the per-minute window, and a full batch fills most of a minute on every plan: the default plan gives 60 units per minute and 50-address batches, and a live Scale or Index pack raises both. Pace multi-batch runs a minute apart and read the reset time from the quota.
Each identity reports whether the address owner attested it rather than it being correlated by a third party, and each X handle reports whether it still reaches anyone: a handle can be attested and suspended, or freed and since taken by a stranger.
Send every address you need in one call. Duplicates are removed before you are charged, but each copy still costs throughput.
A retried call bills again: duplicates are removed inside one call, never across calls, and a tool call cannot carry an idempotency key. Before resending a call that may have gone through, read the balance instead of guessing.
Esquema de entrada
{'type': 'object', '$schema': 'https://json-schema.org/draft/2020-12/schema', 'required': ['addresses'], 'properties': {'addresses': {'type': 'array', 'items': {'type': 'string', 'pattern': '^0x[a-fA-F0-9]{40}$'}, 'maxItems': 1000, 'minItems': 1, 'description': 'Ethereum addresses, each 0x followed by 40 hex characters. Case does not matter.'}}}
walletlink_submit_job
Submit a background lookup job
Submit a list of addresses as a background job. A job runs a deeper scan than the resolve tool: an address the index has not checked, or holds only stale answers for, is resolved against live sources, so a job can find identities the resolve tool reports as never seen. Use it for lists larger than one resolve call, or when misses are worth re-checking.
COST: billed on matches exactly like resolving, when the job completes: one match credit per address that resolved to an X handle or a Farcaster account, misses free. One job may be active per account at a time; a second submission is refused until the first finishes, and the refusal names the active job id. A submission is capped at 10 times the match balance, so the worst case is bounded by what the account already holds. Submitting itself spends one request-unit of the rate window.
The submission returns a job id. Poll walletlink_job_status for progress and, on completion, the results. A job that fails is never billed.
Resubmitting the same list after a job completes runs the whole job again and bills its matches again.
Acceso externo
Esquema de entrada
{'type': 'object', '$schema': 'https://json-schema.org/draft/2020-12/schema', 'required': ['addresses'], 'properties': {'addresses': {'type': 'array', 'items': {'type': 'string', 'pattern': '^0x[a-fA-F0-9]{40}$'}, 'minItems': 1, 'description': 'Ethereum addresses, each 0x followed by 40 hex characters. Case does not matter. The ceiling is the balance-derived cap, not a fixed number; a list over the cap is refused with the cap named.'}}}
walletlink_wallets_by_farcaster_username
Find wallets behind a Farcaster username
Find the wallets in the index attested to a Farcaster account. Only wallets whose recorded sources are all attested come back, so a wallet whose Farcaster verification sits beside a correlated source is left out; resolving that address still shows it, labeled. Needs a key that belongs to an account: a key bought with USDC alone gets ACCOUNT_REQUIRED.
COST: one match credit per wallet returned, and a page holds up to 100. A username nobody holds returns an empty list and is free. A retried call bills its returned wallets again.
Pass the username whole, including any .eth suffix: an ENS name attached to a Farcaster account is a large share of the index, and stripping the suffix will find nothing. Results are ordered by follower count, highest first.
Esquema de entrada
{'type': 'object', '$schema': 'https://json-schema.org/draft/2020-12/schema', 'required': ['username'], 'properties': {'cursor': {'type': 'string', 'description': 'The next_cursor from a previous call, passed back unchanged. Omit for the first page.'}, 'username': {'type': 'string', 'pattern': '^[a-zA-Z0-9][a-zA-Z0-9.-]{0,31}$', 'description': 'A Farcaster username, such as dwr or vitalik.eth. 1 to 32 characters of letters, numbers, dots and hyphens, starting with a letter or a number.'}}}
walletlink_wallets_by_x_handle
Find wallets behind an X handle
Find the wallets in the index attested to an X account. The reverse of resolving an address. Only wallets whose recorded sources are all attested come back, so a wallet whose attested link sits beside a correlated source is left out; resolving that address still shows it, labeled. Needs a key that belongs to an account: a key bought with USDC alone gets ACCOUNT_REQUIRED.
COST: one match credit per wallet returned, and a page holds up to 100. A handle nobody holds returns an empty list and is free. The free allowance is 100 matches per 30 days, so a single widely held handle can spend all of it in one call. Check the balance first with walletlink_account_balance if that matters. A retried call bills its returned wallets again.
Results are ordered by Farcaster follower count, highest first. When more_pages is true, pass next_cursor back to continue.
Esquema de entrada
{'type': 'object', '$schema': 'https://json-schema.org/draft/2020-12/schema', 'required': ['handle'], 'properties': {'cursor': {'type': 'string', 'description': 'The next_cursor from a previous call, passed back unchanged. Omit for the first page.'}, 'handle': {'type': 'string', 'pattern': '^@?[a-zA-Z0-9_]{1,15}$', 'description': 'An X handle, 1 to 15 letters, numbers or underscores. A leading @ is accepted. Case does not matter.'}}}
Historial
Cambios recientes en herramientas
Modificado
walletlink_wallets_by_farcaster_username
27 de September de 2026 a las 02:50
Modificado
walletlink_wallets_by_x_handle
27 de September de 2026 a las 02:50
Modificado
walletlink_estimate_list
25 de September de 2026 a las 02:59
Modificado
walletlink_job_status
25 de September de 2026 a las 02:59
Modificado
walletlink_submit_job
25 de September de 2026 a las 02:59
Modificado
walletlink_account_balance
25 de September de 2026 a las 02:59
Modificado
walletlink_index_coverage
25 de September de 2026 a las 02:59
Modificado
walletlink_wallets_by_farcaster_username
25 de September de 2026 a las 02:59
Modificado
walletlink_wallets_by_x_handle
25 de September de 2026 a las 02:59
Modificado
walletlink_resolve_wallets
25 de September de 2026 a las 02:59
Añadido
walletlink_estimate_list
17 de September de 2026 a las 12:55
Añadido
walletlink_job_status
17 de September de 2026 a las 12:55
Añadido
walletlink_submit_job
17 de September de 2026 a las 12:55
Añadido
walletlink_account_balance
17 de September de 2026 a las 12:55
Añadido
walletlink_index_coverage
17 de September de 2026 a las 12:55
Añadido
walletlink_wallets_by_farcaster_username
17 de September de 2026 a las 12:55
Añadido
walletlink_wallets_by_x_handle
17 de September de 2026 a las 12:55
Añadido
walletlink_resolve_wallets
17 de September de 2026 a las 12:55
Descubrir
Servidores MCP similares
AgentLux
io.github.agentlux/agentlux
Operates an agent avatar marketplace with item generation, purchases, creator earnings, public profiles, social activity, and ERC…
robinx-mcp
io.github.jamhimself/robinx-mcp
Analyzes Robinhood Chain tokens, wallets, deployers, on-chain trading activity, and X/Telegram signals for token risk and trading…
peck-mcp
io.github.kryp2/peck-mcp
Reads and writes to a BSV-based social graph, including posts, feeds, profiles, follows, friends, messages, threads, and on-chain…
Voicescape — on-chain identity and tipping for AI agents
io.github.VoiceScapee/voicescape
Looks up on-chain agent profiles and directories, verifies IPFS profile availability, and reports public tipping activity on Hede…
The Floor
markets.thefloor/club
Provides an agent-oriented club for social interaction, paid tasks, work shifts, bounties, token launches and withdrawals.
Weir
social.weir/weir
Reads and browses creator posts on Weir, checks authorship and agent identities, and reads on-chain content prices on Sui without…
InstaVeil Agent Commerce
com.instaveil/agent-commerce
Discovers and facilitates x402 USDC purchases of paid public Instagram data products for agents.
mcp
ai.elfa/mcp
Analyzes crypto-related discussions and signals from X and Telegram and supports automated condition monitoring.