Servidor MCP
DrapeCut
com.drapecut/drapecut
Qué hace este MCP
Simulates composite-fabric draping on CAD surfaces, compares fibre angles, creates multi-piece layouts, and exports DXF or PDF patterns.
Capacidades
Herramientas
16
herramientas
compare_drapes
Compare up to 12 warp angles, sequentially, at one fixed seed and cloth configuration.
When omitted, seed is suggested once for the first angle. Results rank by
coverage descending, then percentage above lock ascending, then maximum
shear ascending. This is a stated comparison rule, not a global optimum.
Runs use the requested/preset pitch, never a hidden coarse approximation.
Export the chosen result promptly: backend result IDs are temporary.
Esquema de entrada
{'type': 'object', 'title': 'compare_drapesArguments', 'required': ['workspace_id', 'mesh_id', 'angles'], 'properties': {'seed': {'anyOf': [{'type': 'array', 'items': {'type': 'number'}, 'maxItems': 3, 'minItems': 3}, {'type': 'null'}], 'title': 'Seed', 'default': None}, 'pitch': {'anyOf': [{'type': 'number', 'exclusiveMinimum': 0}, {'type': 'null'}], 'title': 'Pitch', 'default': None}, 'angles': {'type': 'array', 'items': {'type': 'number'}, 'title': 'Angles', 'maxItems': 12, 'minItems': 1}, 'offset': {'type': 'number', 'title': 'Offset', 'default': 0, 'maximum': 50, 'minimum': -50}, 'mesh_id': {'type': 'string', 'title': 'Mesh Id', 'pattern': '^[A-Za-z0-9_-]{1,80}$'}, 'fabric_id': {'type': 'string', 'title': 'Fabric Id', 'default': 'carbon-twill-3k'}, 'hole_area': {'anyOf': [{'type': 'number', 'minimum': 0}, {'type': 'null'}], 'title': 'Hole Area', 'default': None}, 'lock_angle': {'anyOf': [{'type': 'number', 'exclusiveMaximum': 90, 'exclusiveMinimum': 0}, {'type': 'null'}], 'title': 'Lock Angle', 'default': None}, 'workspace_id': {'type': 'string', 'title': 'Workspace Id', 'pattern': '^[0-9a-f]{48}$'}}}
Esquema de salida
{'type': 'object', 'title': 'compare_drapesDictOutput', 'additionalProperties': True}
create_layout
Start covering one surface with multiple pieces of the same ply/fabric.
This is not a laminate stack. overlap is mm; supplied seeds are laid first
and additional pieces fill remaining ground, up to max_pieces. Poll the
returned job_id with get_job(kind='layout'); export with layout=true.
Esquema de entrada
{'type': 'object', 'title': 'create_layoutArguments', 'required': ['workspace_id', 'mesh_id'], 'properties': {'angle': {'type': 'number', 'title': 'Angle', 'default': 0}, 'pitch': {'anyOf': [{'type': 'number', 'exclusiveMinimum': 0}, {'type': 'null'}], 'title': 'Pitch', 'default': None}, 'seeds': {'anyOf': [{'type': 'array', 'items': {'type': 'array', 'items': {'type': 'number'}, 'maxItems': 3, 'minItems': 3}, 'maxItems': 12, 'minItems': 1}, {'type': 'null'}], 'title': 'Seeds', 'default': None}, 'offset': {'type': 'number', 'title': 'Offset', 'default': 0, 'maximum': 50, 'minimum': -50}, 'mesh_id': {'type': 'string', 'title': 'Mesh Id', 'pattern': '^[A-Za-z0-9_-]{1,80}$'}, 'overlap': {'type': 'number', 'title': 'Overlap', 'default': 20, 'minimum': 0}, 'fabric_id': {'type': 'string', 'title': 'Fabric Id', 'default': 'carbon-twill-3k'}, 'hole_area': {'anyOf': [{'type': 'number', 'minimum': 0}, {'type': 'null'}], 'title': 'Hole Area', 'default': None}, 'lock_angle': {'anyOf': [{'type': 'number', 'exclusiveMaximum': 90, 'exclusiveMinimum': 0}, {'type': 'null'}], 'title': 'Lock Angle', 'default': None}, 'max_pieces': {'type': 'integer', 'title': 'Max Pieces', 'default': 6, 'maximum': 12, 'minimum': 1}, 'workspace_id': {'type': 'string', 'title': 'Workspace Id', 'pattern': '^[0-9a-f]{48}$'}}}
Esquema de salida
{'type': 'object', 'title': 'create_layoutDictOutput', 'additionalProperties': True}
create_workspace
Create a private two-hour workspace and return its ID and CAD upload page.
Start here before loading a sample or importing a user's CAD part.
The ID and upload/download links grant access; do not publish them.
Esquema de entrada
{'type': 'object', 'title': 'create_workspaceArguments', 'properties': {}}
Esquema de salida
{'type': 'object', 'title': 'create_workspaceDictOutput', 'additionalProperties': True}
export_pattern
Export a result as DXF or tiled 1:1 PDF and return a temporary download_url for the user. Use layout=true with a layout_id to export all pieces. Download before workspace expiry.
Esquema de entrada
{'type': 'object', 'title': 'export_patternArguments', 'required': ['workspace_id', 'result_id'], 'properties': {'grid': {'type': 'integer', 'title': 'Grid', 'default': 0, 'maximum': 50, 'minimum': 0}, 'paper': {'enum': ['a4', 'letter', 'a3'], 'type': 'string', 'title': 'Paper', 'default': 'a4'}, 'format': {'enum': ['dxf', 'pdf'], 'type': 'string', 'title': 'Format', 'default': 'dxf'}, 'layout': {'type': 'boolean', 'title': 'Layout', 'default': False}, 'result_id': {'type': 'string', 'title': 'Result Id', 'pattern': '^[A-Za-z0-9_-]{1,80}$'}, 'workspace_id': {'type': 'string', 'title': 'Workspace Id', 'pattern': '^[0-9a-f]{48}$'}}}
Esquema de salida
{'type': 'object', 'title': 'export_patternDictOutput', 'additionalProperties': True}
get_job
Poll STEP import or multi-piece layout; retry after a short delay while done=false.
STEP completion returns a step_id and at most 20 basic face descriptions;
use list_faces for geometric descriptions and pagination. Layout completion
returns compact per-piece statistics and a layout_id for export_pattern.
Solo lectura
Idempotente
Esquema de entrada
{'type': 'object', 'title': 'get_jobArguments', 'required': ['workspace_id', 'kind', 'job_id'], 'properties': {'kind': {'enum': ['step', 'layout'], 'type': 'string', 'title': 'Kind'}, 'job_id': {'type': 'string', 'title': 'Job Id', 'pattern': '^[A-Za-z0-9_-]{1,80}$'}, 'workspace_id': {'type': 'string', 'title': 'Workspace Id', 'pattern': '^[0-9a-f]{48}$'}}}
Esquema de salida
{'type': 'object', 'title': 'get_jobDictOutput', 'additionalProperties': True}
import_part
Import a file already uploaded to this workspace. Get upload_id from list_uploads. STEP/STP returns a job to poll with get_job(kind='step'), then inspect and select faces.
Esquema de entrada
{'type': 'object', 'title': 'import_partArguments', 'required': ['workspace_id', 'upload_id'], 'properties': {'upload_id': {'type': 'string', 'title': 'Upload Id', 'pattern': '^[0-9a-f]{32}$'}, 'workspace_id': {'type': 'string', 'title': 'Workspace Id', 'pattern': '^[0-9a-f]{48}$'}}}
Esquema de salida
{'type': 'object', 'title': 'import_partDictOutput', 'additionalProperties': True}
list_fabrics
List fabric IDs, nominal locking angles, tow pitch (mm), thickness and UD settings.
Solo lectura
Idempotente
Esquema de entrada
{'type': 'object', 'title': 'list_fabricsArguments', 'properties': {}}
Esquema de salida
{'type': 'object', 'title': 'list_fabricsDictOutput', 'additionalProperties': True}
list_faces
Inspect STEP face IDs, areas, bounds, centroids, neighbours and planar mesh normals.
This requires the MCP face-metadata endpoint in the configured backend.
Centroids/bounds describe the tessellation; do not assume a closed solid's
entire skin is the intended draping surface. Ask for explicit face IDs
when the intended surface cannot be identified from this information.
Solo lectura
Idempotente
Esquema de entrada
{'type': 'object', 'title': 'list_facesArguments', 'required': ['workspace_id', 'step_id'], 'properties': {'limit': {'type': 'integer', 'title': 'Limit', 'default': 50, 'maximum': 100, 'minimum': 1}, 'offset': {'type': 'integer', 'title': 'Offset', 'default': 0, 'minimum': 0}, 'step_id': {'type': 'string', 'title': 'Step Id', 'pattern': '^[A-Za-z0-9_-]{1,80}$'}, 'workspace_id': {'type': 'string', 'title': 'Workspace Id', 'pattern': '^[0-9a-f]{48}$'}}}
Esquema de salida
{'type': 'object', 'title': 'list_facesDictOutput', 'additionalProperties': True}
list_samples
List built-in example parts that can be loaded without uploading a file.
Solo lectura
Idempotente
Esquema de entrada
{'type': 'object', 'title': 'list_samplesArguments', 'properties': {}}
Esquema de salida
{'type': 'object', 'title': 'list_samplesDictOutput', 'additionalProperties': True}
list_uploads
List files uploaded through this workspace's upload_url; pass an upload_id to import_part.
Solo lectura
Idempotente
Esquema de entrada
{'type': 'object', 'title': 'list_uploadsArguments', 'required': ['workspace_id'], 'properties': {'workspace_id': {'type': 'string', 'title': 'Workspace Id', 'pattern': '^[0-9a-f]{48}$'}}}
Esquema de salida
{'type': 'object', 'title': 'list_uploadsDictOutput', 'additionalProperties': True}
load_sample
Register a built-in sample and return a mesh_id for draping.
Esquema de entrada
{'type': 'object', 'title': 'load_sampleArguments', 'required': ['workspace_id', 'name'], 'properties': {'name': {'type': 'string', 'title': 'Name', 'pattern': '^[A-Za-z0-9_-]{1,80}$'}, 'workspace_id': {'type': 'string', 'title': 'Workspace Id', 'pattern': '^[0-9a-f]{48}$'}}}
Esquema de salida
{'type': 'object', 'title': 'load_sampleDictOutput', 'additionalProperties': True}
mesh_landmarks
Inspect seed landmarks in mm, paged within each category (max 100 per category).
Returns centre, corners, edge midpoints and origin intersections. Full
section polylines are omitted. Follow next_offset for more points.
Solo lectura
Idempotente
Esquema de entrada
{'type': 'object', 'title': 'mesh_landmarksArguments', 'required': ['workspace_id', 'mesh_id'], 'properties': {'limit': {'type': 'integer', 'title': 'Limit', 'default': 50, 'maximum': 100, 'minimum': 1}, 'offset': {'type': 'integer', 'title': 'Offset', 'default': 0, 'minimum': 0}, 'mesh_id': {'type': 'string', 'title': 'Mesh Id', 'pattern': '^[A-Za-z0-9_-]{1,80}$'}, 'workspace_id': {'type': 'string', 'title': 'Workspace Id', 'pattern': '^[0-9a-f]{48}$'}}}
Esquema de salida
{'type': 'object', 'title': 'mesh_landmarksDictOutput', 'additionalProperties': True}
run_drape
Drape one fabric at one warp angle (degrees); return statistics and an exportable result_id.
Omitted seed is suggested on the surface. Omitted pitch/lock_angle use the
fabric preset, including its UD spread/compression settings. pitch/offset
are mm; hole_area is mm² (null bridges holes). The API may increase pitch
to bound the grid; pitch_used reports the actual resolution. Kinematic
shear/locking statistics are not a structural strength calculation.
Esquema de entrada
{'type': 'object', 'title': 'run_drapeArguments', 'required': ['workspace_id', 'mesh_id'], 'properties': {'seed': {'anyOf': [{'type': 'array', 'items': {'type': 'number'}, 'maxItems': 3, 'minItems': 3}, {'type': 'null'}], 'title': 'Seed', 'default': None}, 'angle': {'type': 'number', 'title': 'Angle', 'default': 0}, 'pitch': {'anyOf': [{'type': 'number', 'exclusiveMinimum': 0}, {'type': 'null'}], 'title': 'Pitch', 'default': None}, 'offset': {'type': 'number', 'title': 'Offset', 'default': 0, 'maximum': 50, 'minimum': -50}, 'mesh_id': {'type': 'string', 'title': 'Mesh Id', 'pattern': '^[A-Za-z0-9_-]{1,80}$'}, 'fabric_id': {'type': 'string', 'title': 'Fabric Id', 'default': 'carbon-twill-3k'}, 'hole_area': {'anyOf': [{'type': 'number', 'minimum': 0}, {'type': 'null'}], 'title': 'Hole Area', 'default': None}, 'lock_angle': {'anyOf': [{'type': 'number', 'exclusiveMaximum': 90, 'exclusiveMinimum': 0}, {'type': 'null'}], 'title': 'Lock Angle', 'default': None}, 'workspace_id': {'type': 'string', 'title': 'Workspace Id', 'pattern': '^[0-9a-f]{48}$'}}}
Esquema de salida
{'type': 'object', 'title': 'run_drapeDictOutput', 'additionalProperties': True}
select_faces
Create a drapable mesh from explicitly chosen STEP face IDs; reports connectedness.
Esquema de entrada
{'type': 'object', 'title': 'select_facesArguments', 'required': ['workspace_id', 'step_id', 'face_ids'], 'properties': {'step_id': {'type': 'string', 'title': 'Step Id', 'pattern': '^[A-Za-z0-9_-]{1,80}$'}, 'face_ids': {'type': 'array', 'items': {'type': 'integer'}, 'title': 'Face Ids', 'minItems': 1}, 'workspace_id': {'type': 'string', 'title': 'Workspace Id', 'pattern': '^[0-9a-f]{48}$'}}}
Esquema de salida
{'type': 'object', 'title': 'select_facesDictOutput', 'additionalProperties': True}
server_status
Check the hosted DrapeCut solver and read connection/workspace limits.
Solo lectura
Idempotente
Esquema de entrada
{'type': 'object', 'title': 'server_statusArguments', 'properties': {}}
Esquema de salida
{'type': 'object', 'title': 'server_statusDictOutput', 'additionalProperties': True}
suggest_seed
Suggest a starting point on a mesh. Validate its coverage with an actual drape.
Esquema de entrada
{'type': 'object', 'title': 'suggest_seedArguments', 'required': ['workspace_id', 'mesh_id'], 'properties': {'angle': {'type': 'number', 'title': 'Angle', 'default': 0}, 'mesh_id': {'type': 'string', 'title': 'Mesh Id', 'pattern': '^[A-Za-z0-9_-]{1,80}$'}, 'lock_angle': {'type': 'number', 'title': 'Lock Angle', 'default': 45, 'exclusiveMaximum': 90, 'exclusiveMinimum': 0}, 'workspace_id': {'type': 'string', 'title': 'Workspace Id', 'pattern': '^[0-9a-f]{48}$'}}}
Esquema de salida
{'type': 'object', 'title': 'suggest_seedDictOutput', 'additionalProperties': True}
Historial
Cambios recientes en herramientas
Añadido
suggest_seed
3 de October de 2026 a las 02:40
Añadido
server_status
3 de October de 2026 a las 02:40
Añadido
select_faces
3 de October de 2026 a las 02:40
Añadido
run_drape
3 de October de 2026 a las 02:40
Añadido
mesh_landmarks
3 de October de 2026 a las 02:40
Añadido
load_sample
3 de October de 2026 a las 02:40
Añadido
list_samples
3 de October de 2026 a las 02:40
Añadido
list_faces
3 de October de 2026 a las 02:40
Añadido
list_fabrics
3 de October de 2026 a las 02:40
Añadido
import_part
3 de October de 2026 a las 02:40
Añadido
get_job
3 de October de 2026 a las 02:40
Añadido
export_pattern
3 de October de 2026 a las 02:40
Añadido
create_layout
3 de October de 2026 a las 02:40
Añadido
compare_drapes
3 de October de 2026 a las 02:40
Añadido
list_uploads
3 de October de 2026 a las 02:40
Añadido
create_workspace
3 de October de 2026 a las 02:40
Descubrir
Servidores MCP similares
kernelcad
com.kernelcad/kernelcad
Authors, evaluates, reviews, simulates, edits, and exports parametric CAD assemblies and geometry from editable TypeScript-based …
Picas to millimeters, number discarded
io.github.sadri-dridi/pica-mm
Converts picas to millimeters and provides general developer utility checks.
Ciceros to millimeters, number discarded
io.github.sadri-dridi/cicero-mm
Converts ciceros, a typographic unit, to millimeters.
bimhouse
house.bim/bimhouse
Creates and edits house BIM models, checks Japanese building-code constraints, estimates materials and construction costs, matche…
ScanBIM MCP
io.scanbimlabs/scanbim-mcp
Uploads and analyzes BIM and 3D models, supports Autodesk Construction Cloud project workflows, detects clashes, and provides vie…
FabTally 3D-Print Slicer, Quote & DFM
com.fabtally/slicer
Analyzes, validates, or slices 3D models and provides printability checks, printer and material recommendations, orientation opti…
Aspicio
io.github.frontsail-ai/aspicio
Describes, renders, and interactively views DXF and vector PDF technical drawings, including layers, entities, dimensions, and ex…
frontier-reference
so.falcon/frontier-reference
Provides reference information on frontier technologies, sensors, companies, file formats, format conversion, and related design …